2020 Seed Labs
Search
  • Home
  • About
    • About Us
    • Alberta Lab
    • Manitoba Lab
    • Chile Lab
  • Services
    • Services Overview
    • Testing Services
    • Molecular Diagnostics
    • Crop Inspection
    • Seed Import and Export
    • Agronomy Services
    • Research & Development
    • Training & Consulting
    • Greenhouse
    • Spornado
  • Resources
    • News & Events
    • Learning Centre
    • Industry Contacts
    • Videos
    • Online Forms
    • Tech Bulletin
  • Contact Us
    • Contact Us
    • Careers
  • Submit a Sample
  • Log In
Seed quality trends from the 2024 harvest featured
March 12, 2025

Seed quality trends from the 2024 harvest – the picture from the lab.

20/20 Seed Labs Research & Development

Moses Palmer – Senior seed analyst and Laboratory Manager

Harvest has successfully concluded across the prairies, and we have a clear picture of the seed quality. Seed quality data presented below is based on seed samples delivered to the lab for testing from September to November 2024. Seed quality overall has been very good considering all the challenges growers contended with this season. Heat and moisture stress at grain filling and maturity combined with fields in some areas recovering from hail damage left everyone wondering what quality would look like. We still see the effect of these adverse field conditions on quality, although plants are resilient and recovered in time to produce average yields across the prairies.

Barley samples coming into the lab at the start of harvest had high levels of dormancy (Table 1). The lab resorted to applying dormancy breaking measures which resulted in germination results in the high 90’s with corresponding vigor results. Seed dormancy usually breaks in the seed as the seed matures post-harvest because of abscisic acid and gibberellic acid levels stabilizing during storage. Growers are advised to conduct another germination and vigor test before seeding in the spring to determine if seed dormancy is still an issue in the lot. Cereal samples tested in November had slightly lower germination and vigor results compared to samples tested in September and November. These fields could have matured later in the season than other fields due to moisture stress and hail damage.

Table 1. Comparison of germination and vigor levels in cereals tested in the lab from September to November 2024.

 

September

October

November

Crop kind

Germination %

Vigour %

Germination %

Vigour %

Germination %

Vigour %

Barley

96

95

96

95

94

93

Oat

96

90

96

93

95

94

Rye

95

94

82

96

*

*

Triticale

93

92

96

94

95

93

Wheat

95

96

97

95

97

95

Wheat, durum

94

95

96

93

94

92

             

* No data for the month.

Dry and hot conditions at harvest for pulses are directly responsible for the lower germination and vigor results we see in pulses (Table 2). Mechanical damage to pulses is a big issue when dealing with peas and faba beans, especially in dry years like this. Growers are advised to handle the seed as little as possible and take extra precautions to prevent damage from augers when moving seed.

Table 2. Comparison of germination and vigor levels in pulses tested in the lab from September to November 2024.

 

September

October

November

Crop

Germination %

Vigour %

Germination %

Vigour %

Germination %

Vigour %

Bean, faba

95

93

85

78

88

86

Chickpea, kabuli

92

96

91

91

*

*

Lentil

97

92

95

90

96

93

Pea, field

90

89

89

89

88

85

* No data for the month.

Some of the seed conditions discussed above could become worse when the seed lot is exposed to more stress such as the cold stress during storage over winter. It is our recommendation that growers test their seed lots again during the spring to confirm that quality has been maintained over the storage period. Please do not hesitate to reach out to the lab with questions related to seed testing and quality.

Contact us via email support@2020seedlabs.ca or by phone toll-free 1-877 420 2099.

Alberta Disease Update – December 2024 January 2025 Disease Update

Related Posts

Why Smart Businesses Start with the Right Questions—and the Right Lab

Research & Development

Why Smart Businesses Start with the Right Questions—and the Right Lab

What’s Slowing Innovation The Answer Might Surprise You-featured-v2

Research & Development

What’s Slowing Innovation The Answer Might Surprise You

Spring to Success, Cover Photo for Learning Centre-feature

Research & Development

Spring to Success

2020 Seed Labs

Contact Us

support@2020seedlabs.ca

Manitoba
3489 Pembina Hwy
Winnipeg, MB R3V 1A4
Phone: 1-204-261-3755

Alberta
507 – 11 Avenue
Nisku, AB T9E 7N5
Phone: 1-877-420-2099

© Copyright 20/20 Seed Labs Inc. 2024. All rights reserved. Privacy Policy
  • 1-877-420-2099
  • support@2020seedlabs.ca

X

How to Submit a Sample
to 20/20 Seed Labs Inc.

  Please use our our ‘3-Step Process’ when submitting samples to be tested.

Take a Representative Sample

Select Your Testing and Enter Your Sample Details

Ship or Drop Off Your Sample To Our Lab

STEP 1: Take a Representative Sample

We provide testing on seeds, plants and soil. Select the type of sample below that you are submitting for sample collection instructions.

  • Seed Samples

    The table below outlines the type of seed test and required sampling amount needed for each test. Be sure to follow the 4 steps indicated to collect your sample.

    Cereals

    Seed Health & Disease Tests
    500 g (2 1/2 cups)
    Purity Tests
    1 kg (5 cups)

    Pulses

    Seed Health & Disease Tests
    500 g (3 cups)
    Purity Tests
    1 kg (6 cups)

    Grasses & Forages

    All Testing
    250 g

    Canola

    All Testing
    250 g
    20/20 Seed Labs - How to Take a Seed Sample
  • Plant Samples

    The sampling cards below outline the steps to collect your required plant samples for testing.



  • Soil Samples

    The sampling cards below outline the steps to collect your required soil samples for testing.


STEP 2: Select Your Testing and Enter Your Sample Details

Select the testing services you will require from the pricing schedule below, then choose how you want submit your sample: 

Option 1:
Submit your sample online: 

Option 2:
Write Your customer number and sample details on the sample bag and prepare the sample for shipping or drop-off.

STEP 3: Ship or Drop Off Your Sample to Our Lab

Mailing Addresses

NISKU, ALBERTA

20/20 Seed Labs, Inc.
507-11 Avenue
Nisku, AB T9E 7N5
Toll Free: 1-877-420-2099

WINNIPEG, MANITOBA

20/20 Seed Labs, Inc.
3489 Pembina Hwy
Winnipeg, MB R3V 1A4
Toll Free: 1-866-540-7333

After Hours Drop Off

There is a locked and secure after hours drop off box in front of both the Nisku, Alberta and Winnipeg, Manitoba 20/20 Seed Labs offices. Please leave your samples in the drop off box if you are dropping off a sample on the weekends, a statutory holiday, or after 4:30 p.m. on a weekday.

Sample Drop Off Locations

agroplus-logo

Agro Plus Inc.

3895-9th Avenue North
Lethbridge, Alberta
T1H 6G8
Phone: 1-403-327-7070

down-to-earth-labs-logo

Down to Earth Labs

3510-6th Avenue North
Lethbridge, Alberta
T1H 5C3
Phone: 1-403-328-1133

ici-logo

Independent Crop Inputs Inc.

Hwy #3, 2.5km East of Barnwell, Alberta
Box 4690, Taber, Alberta
T1G 2E1
Phone: 1-403-223-1325

  • Step 1: Review Requirements

    Requirements for Submitting Samples

    Please submit the correct sample size for the test required.

    Germination and Vigour Tests
    Most tests of this type require approximately 250 grams or 1 cup of seed. For very large seeds such as some types of peas or beans, up to twice as much seed may be required.

    Disease and Seed Health Tests
    The quantity of seed for most disease testing is the same as a germination test. Some tests with special requirements may require larger amounts of seed.

    Purity Tests
    Test volumes for purity and % pure seed vary with crop type and are available on the purity weight form.

    Rhizobia Test
    Small seeded legumes require a 1 cup sample. Large seeded legumes require a minimum 2 cup sample. Inoculant, loose peat, granules, and liquid  should be tested in the original sealed container size.

    Canadian Seed Institute Samples
    Follow the CSI instructions for the crop type and the weight to be submitted. Example: Wheat, Purity = a minimum of 1 kg of seed.

    APHIS Samples
    Quantities of seed to be tested for an APHIS certificate for export to the US vary with crop type. Please contact us for the correct volume required.

    Soil Samples
    We test soil for clubroot and for a weed check analysis. It is preferable to have a minimum 2 cup or 1 kg sample size.

    Plant Specimens
    Root samples for clubroot analysis should have only one plant per bag and other plant or leaf samples should contain an adequate amount for representation of the tissue. Please pack fresh samples with moist paper towel and drop off at lab or ship by overnight courier only. Pack in a cooler with ice packs if possible. Do not allow sample to contact ice directly.

    FLAX / TRIFFID Tests
    This test requires either 1 or 2 kg of seed. Please CLICK HERE to use the FLAX SAMPLE SUBMISSION FORM for all samples and to confirm the exact amount of seed required.

    If you’re still unsure of the sample size required for your test, please contact us.

  • Step 2: Packaging

    Packaging

    Printed Sample Bags

    20/20 Seed Labs Inc. provides printed sample bags to all of our customers so they may submit samples with all the information clearly noted. As well, you can use packaging or bags from other labs if necessary.

    Special Requirements

    Some samples require special packaging to ensure the sample’s integrity is not compromised during shipping. Please determine if your sample may require any of the following procedures to keep the sample in proper condition.

    Ice Packs

    For samples that need to remain cool during shipping, such as seed or inoculant samples for rhizobia testing.

    Heavy-duty Sealed Poly Bags

    Samples requiring moisture testing should be in a container that will reduce the risk of moisture loss that could cause a change in the sample quality from time of shipping to the time of testing.

  • Step 3: Submit Your Sample

    Guide to Submitting Your Sample Online

    1. Login or sign up for a 20/20 account
    2. Click the “create sample” button
    3. Pick a crop
    4. Choose the number of similar samples for a crop
    5. Enter the information about the seed lot(s); lot numbers, sampler, processor, etc.
    6. Enter the packages or tests you require. (Click here to download a list of our testing packages)
    7. Choose method of printing a bar-coded label (Either a small self-adhesive label or a regular paper label)

    LOG IN NOW | CREATE ACCOUNT

    Other Submission Options

    Submit Your Sample by Mail

    20/20 Seed Labs Inc. receives shipments from all couriers, bus and mail services on a daily basis. You should determine the best method of shipping your samples to ensure it meets your requirements for timeliness and sample integrity upon arrival. We process all samples on arrival and customers with a user name and login can monitor the status of their sample online to determine when it arrived, estimated completion date and check test results.

    Submit Your Sample In-Person

    You may bring your samples directly to our lab, or the after hours drop-off slot. Please call if you have any questions:

    Toll Free: 1-877-420-2099

    In Alberta:
    20/20 Seed Labs Inc.
    507 – 11th Ave
    Nisku, Alberta, Canada
    T9E 7N5

    In Manitoba:
    20/20 Seed Labs Inc.
    3489 Pembina Hwy
    Winnipeg, MB R3V 1A4
    Phone: 1-204-261-3755

X

STEP 3: Ship or Drop Off Your Sample to Our Lab

Mailing Addresses

NISKU, ALBERTA

20/20 Seed Labs, Inc.
507-11 Avenue
Nisku, AB T9E 7N5
Toll Free: 1-877-420-2099

WINNIPEG, MANITOBA

20/20 Seed Labs, Inc.
3489 Pembina Hwy
Winnipeg, MB R3V 1A4
Toll Free: 1-866-540-7333

After Hours Drop Off

There is a locked and secure after hours drop off box in front of both the Nisku, Alberta and Winnipeg, Manitoba 20/20 Seed Labs offices. Please leave your samples in the drop off box if you are dropping off a sample on the weekends, a statutory holiday, or after 4:30 p.m. on a weekday.

Sample Drop Off Locations

agroplus-logo

Agro Plus Inc.

3895-9th Avenue North
Lethbridge, Alberta
T1H 6G8
Phone: 1-403-327-7070

down-to-earth-labs-logo

Down to Earth Labs

3510-6th Avenue North
Lethbridge, Alberta
T1H 5C3
Phone: 1-403-328-1133

ici-logo

Independent Crop Inputs Inc.

Hwy #3, 2.5km East of Barnwell, Alberta
Box 4690, Taber, Alberta
T1G 2E1
Phone: 1-403-223-1325

  • Step 1: Review Requirements

    Requirements for Submitting Samples

    Please submit the correct sample size for the test required.

    Germination and Vigour Tests
    Most tests of this type require approximately 250 grams or 1 cup of seed. For very large seeds such as some types of peas or beans, up to twice as much seed may be required.

    Disease and Seed Health Tests
    The quantity of seed for most disease testing is the same as a germination test. Some tests with special requirements may require larger amounts of seed.

    Purity Tests
    Test volumes for purity and % pure seed vary with crop type and are available on the purity weight form.

    Rhizobia Test
    Small seeded legumes require a 1 cup sample. Large seeded legumes require a minimum 2 cup sample. Inoculant, loose peat, granules, and liquid  should be tested in the original sealed container size.

    Canadian Seed Institute Samples
    Follow the CSI instructions for the crop type and the weight to be submitted. Example: Wheat, Purity = a minimum of 1 kg of seed.

    APHIS Samples
    Quantities of seed to be tested for an APHIS certificate for export to the US vary with crop type. Please contact us for the correct volume required.

    Soil Samples
    We test soil for clubroot and for a weed check analysis. It is preferable to have a minimum 2 cup or 1 kg sample size.

    Plant Specimens
    Root samples for clubroot analysis should have only one plant per bag and other plant or leaf samples should contain an adequate amount for representation of the tissue. Please pack fresh samples with moist paper towel and drop off at lab or ship by overnight courier only. Pack in a cooler with ice packs if possible. Do not allow sample to contact ice directly.

    FLAX / TRIFFID Tests
    This test requires either 1 or 2 kg of seed. Please CLICK HERE to use the FLAX SAMPLE SUBMISSION FORM for all samples and to confirm the exact amount of seed required.

    If you’re still unsure of the sample size required for your test, please contact us.

  • Step 2: Packaging

    Packaging

    Printed Sample Bags

    20/20 Seed Labs Inc. provides printed sample bags to all of our customers so they may submit samples with all the information clearly noted. As well, you can use packaging or bags from other labs if necessary.

    Special Requirements

    Some samples require special packaging to ensure the sample’s integrity is not compromised during shipping. Please determine if your sample may require any of the following procedures to keep the sample in proper condition.

    Ice Packs

    For samples that need to remain cool during shipping, such as seed or inoculant samples for rhizobia testing.

    Heavy-duty Sealed Poly Bags

    Samples requiring moisture testing should be in a container that will reduce the risk of moisture loss that could cause a change in the sample quality from time of shipping to the time of testing.

  • Step 3: Submit Your Sample

    Guide to Submitting Your Sample Online

    1. Login or sign up for a 20/20 account
    2. Click the “create sample” button
    3. Pick a crop
    4. Choose the number of similar samples for a crop
    5. Enter the information about the seed lot(s); lot numbers, sampler, processor, etc.
    6. Enter the packages or tests you require. (Click here to download a list of our testing packages)
    7. Choose method of printing a bar-coded label (Either a small self-adhesive label or a regular paper label)

    LOG IN NOW | CREATE ACCOUNT

    Other Submission Options

    Submit Your Sample by Mail

    20/20 Seed Labs Inc. receives shipments from all couriers, bus and mail services on a daily basis. You should determine the best method of shipping your samples to ensure it meets your requirements for timeliness and sample integrity upon arrival. We process all samples on arrival and customers with a user name and login can monitor the status of their sample online to determine when it arrived, estimated completion date and check test results.

    Submit Your Sample In-Person

    You may bring your samples directly to our lab, or the after hours drop-off slot. Please call if you have any questions:

    Toll Free: 1-877-420-2099

    In Alberta:
    20/20 Seed Labs Inc.
    507 – 11th Ave
    Nisku, Alberta, Canada
    T9E 7N5

    In Manitoba:
    20/20 Seed Labs Inc.
    3489 Pembina Hwy
    Winnipeg, MB R3V 1A4
    Phone: 1-204-261-3755

[advanced_iframe id="iframe3" name="iframe3" src="//" style="height:inherit;"]
X